Back of the Board : Uncategorized

Building America with True Craftsman & WindsorONE Category

Rot Rehab

This home in Long Beach, CA came on some hard times with it’s fascia and window trim.  The rot problem had become so bad they needed to call in some help, but don’t judge, it could happen to anyone. Luckily the team at Mamelli Painting had just the right fix, WindsorONE S1S2e.  WindsorONE Protected boards […]

PHS Construction is in da house!

Paul Slipper is the owner of PHS Construction based out of Encinitas, CA. Here you can see the PHS Construction crew sporting their new field gear in the form of WinsorONE swag. Paul and his team are putting their craftsmanship to work installing some of the WindsorONE S4S trim boards along with the hottest ticket […]

Work in Progress

It’s no surprise they call this place Rolling Hills Estates.  The view off the back porch says it all. Robert Reagan of VX Design and Construction is in the middle of renovating this home and has some cool highlights coming down the pipe.  Currently, Robert and his crew are beautifying the eaves with Windsorone T&G boards. […]

CS Development Brings Craftsmanship to the Wine Country

While Napa Valley is known for producing some of the world’s best wines, CS Development is keeping pace with some great craftsmanship of their own.  Just check out the detail in this craftsman style renovation using the WindsorONE specialty boards throughout these big covered porch lids.  The team at CS Development are enjoying how straight, […]

If you need to build it, he will come.  Local legend, Master Craftsman, and amateur Kevin Kostner look-a-like Chris Bradley of Bradley Construction came up with a unique solution on this Capistrano Beach renovation.  The simple clean fascia is a great highlight on this home, but there’s more to it than meets the eye.  What […]

Alex is On Board with WindsorONE!

Alex from 52nd Ave Hardware & Building Supply was spotted wearing his WindsorONE t-shirt! 52nd Ave Hardware & Building Supply is based out of Portland, Oregon. They stock WindsorONE S4S boards and they are ready for you to get on board as well! Stop by this lumber yard for all your WindsorONE needs and say […]

What's in your Vault?

And by vault, I mean check out these vaulted ceiling lids by the team at Rodman Construction in Napa, Ca utilizing the tight crisp lines of WindsorONE T&G Specialty Boards.  Nothing highlights a vaulted ceiling like good craftsmanship using real wood from the saw to the ceiling! The Rodman Construction team loved that every piece […]

Covered in Coffered

You can’t beat the view from this hilltop home in San Diego, even on a Rainy day. Ernesto of EVS Construction picked up a WindsorONE flyer two years ago at Dixieline and hasn’t stopped using it since.  The ceilings in the kitchen and common area perfectly compliment the indoor outdoor living experience that he is piecing […]

If we’ve ever spent time together you’ve probably been forced to listen to my Russian, Scottish, Mexican, and Japanese.  North of Dallas Juan Torres is putting my accents to shame with shiplap wall accents all over his impressive custom home renovation.  Juan picked up the 6″ WORS pattern from Tommy over at Wilson Plywood & […]

Dunn Lumber Yard Guys Love WindsorONE!

The Dunn Lumber Normandy Park yard guys are not only super hard working and good looking, but they love loading up their customer’s trucks with WindsorONE! Dunn Lumber is notorious for having the best customer service and quality products, that WindsorONE is a great fit for them. WindsorONE is stocked at all 9 locations so […]

Ceilings and walls, kitchens and bedrooms, stairways and halls,  Jim at Platinum Series Homes has covered everything he can with WindsorONE in this amazing lakeside cottage.  Tucked away on Cedar Creek Lake you will find Jim quickly passing off credit for the fantastic installation to Dan at Custom Trim & Rails. Dan and his crew are no strangers […]

The ultimate outdoor man cave…

This exposed porch has all the amenities a man cave needs: a fire place, heat lamps, refrigerator and big screen TV. Matthew Schlesinger owner of MTS Home Improvements just finished up his latest WindsorONE creation. He installed the WindsorONE edge and center bead SPBC4 on the lid while using the S4S+ Protected trim boards for […]

Seattle native and Seahawks fan, Randy of GDC Construction, insists on quality materials for his projects to provide the best possible result for his customers.  This house in La Jolla is really coming together, especially the front porch.  It’s shaping up to be a great place to sit, swing, and enjoy this beautiful coastal neighborhood.  Not […]

Moving Inside

You may remember seeing Dave Bell’s jobsite in Solana Beach right after he put up his WindsorONE fascia. Well, the project is moving along and looking great! As promised, Dave remembered he’s a wood guy when he moved on to interior design. Between walls, ceilings, and bathrooms Dave continues to make WindsorONE look great in […]

Forget the Million Dollar View, Look at those Soffits!!

Yes, that’s a great view of beautiful San Francisco in the skyline with Alcatraz in the picture as well, but check out how nice those WindsorONE soffits look with sharp edges and crisp tight lines.  The team at Vanderwerf Construction used WindsorONE WOTG around the entire home for this awesome look that really shows off […]

Brandon Welch knows fine dining…

What’s Brandon Welch, owner of Brandon Welch Construction saying about the WindsorONE line? “Your products are always fantastic to work with.” Check out Brandon’s newly remodeled dining room. The wainscot and coffered ceiling were put together with our S4S Trim Board line accented with profiles from the Classic American Molding Collection. Based on the photo […]

Christmas Came Early to Milwaukie Lumber!

The Milwaukie Lumber sales guys aren’t just excited for the holidays this year, they are excited to be stocking WindsorONE in the yard! Stop by Milwaukie Lumber in Milwaukie, Oregon to pick up some WindsorONE for your upcoming project. Need a last minute gift idea for a family member or friend? Buy some WindsorONE trim.. […]

A bird’s eye view of WindsorONE…

The Audubon Society in MA is renovating a couple buildings and one of their requirements was the use of a wood product. Chris Rogers the owner of Cedarbrook General Contracting knew exactly what this rehab needed, WindsorONE+ Protected S4S Trim Boards. In the first shot below you can see that Chris built up the exterior […]

EG Barker -  Woburn MA

Sharing the WindsorONE story.  An old new customer again. Come stop by the WindsorONE table top at E.G. BARKER in Woburn, MA to hear the WindsorONE story. EG BARKER stocks our protected trim boards. They’re located at 10 Jefferson Avenue, Woburn, MA.

Snowing in Hawaii? Yep! It's Snowing WindsorONE!

The rumors are true, it is snowing on the Big Island of Hawaii.. but here on the island of Kauai it is snowing WindsorONE!! Todd Dorny and his crew have done a beautiful job using WindsorONE T&G to cover the walls of this glorious Hawaiian home. Pictured above is John, outside sales rep for Honsador […]

Best Builder Show in the PNW

Live in the PNW? Want to see an awesome show? Come to JLC Live Portland, Oregon. JLC is a regional trade event for builders, remodelers and contractors. Come learn from master craftsman Gary Katz who will be doing a trim and finish carpentry clinic all day today and tomorrow! Be sure to come say hi to […]

Sleep Tight with WindsorONE at Night

Comfort Inn in Calistoga is getting an interior face lift and WindsorONE S4S trim boards are part of it. Taller wainscoting with raised panels are making up most of the rooms to create this clean up-scaled look. (A big thanks to the Moulding Company for supplying the material!) The next time you find your self […]

Christmas comes early for Kurt!

Stephen Weller is a lead carpenter on the team of J & C Construction & Remodeling out of the Columbia MO market. They’ve been pulling their WindsorONE through Lacrosse Lumber where their rep Dan Guill serves up their WindsorONE trim packages. Stephen and the team just completed a residential remodel in which the WindsorONE S4S […]

Bobby Chu and his construction crew…

Bobby Chu Construction is building 16 new homes in Savannah, GA!  WindsorONE S4SSE trim boards are being used for the interior and exterior treatments. A big thanks goes out to Savannah Millworks who secured the WindsorONE line for Bobby Chu through our long time distribution partner, Bluelinx.  

Welcome to the WindsorONE Family, Mr. Plywood!

Mr. Plywood is our newest WindsorONE stocking dealer in the Pacific Northwest! Mr. Plywood is located in Portland, Oregon and is now stocking WindsorONE S4S boards. Stop in and say hi to the newest member of the WindsorONE stocking dealer family! 7609 S.E. Stark Street, Portland OR http://www.mrplywoodinc.com/

Check out this gorgeous Central Park West renovation!  It was recently completed and several of the Classical Colonial WindsorONE moldings were used on this job. Thanks to Dykes Lumber for Supplying the material, and special thank you and credit goes to these professionals for completing this renovation: Architect: Politi + Siano Architects, pllc 212.690.7072 msiano@psa-nyc.com […]

Dave's not here, man...

In Solana Beach Dave Bell of Bell Construction is a busy man.  Nothing makes his crew happier than having a great product that’s easy to work with. Dave Williamson, of Dixieline Lumber & Home Centers, hooked Dave up with a load of WindsorONE S1S2E for the fascia on his current remodel and was nice enough […]

Lasting impressions by Thomas Leising…

Pictures are worth a thousand words however the photos below might leave you speechless. Thomas Leising is a customer of The J.F. Johnson Lumber Company in MD and recently completed the following project with the help of WindsorONE. His customer loves their new millwork which is a compilation of the Classic Colonial molding series along […]

A shirt swap between Williams Woodworks and WindsorONE’s Kurt Williams…

Brothers Jim and Rob Favreau are the proud owners of Williams Woodworks located in Santa Anna CA. The company services Orange County, Riverside County, San Bernardino County, and parts of Los Angeles County. Some of the services they provide are custom stair cases, door installations, interior trim treatments (mantels, built-ins, molding installations) and more. One […]

WindsorONE has got you covered

Whether it’s covered porch lids, kitchen & family room ceilings, wainscoting or wall skinning, WindsorONE specialty boards have been dressing up customer homes for years.  Craftsman are loving using real wood once again and bringing back a Classical look that makes a home stand out.  Ganahl Lumber supplied all of the 1×8 tongue & groove […]

Northeast Contest - Fisherman of the week

A big thank you goes out to Coty Gall of Kinsley Custom in York, PA who was the latest to send in his WindsorONE project and fishing photo for the 2016 Northeast W1 Fishing Contest.  Coty bought his materials at Schmuck Lumber in Hanover, PA; check out Schmuck Lumber for all your WindsorONE and building needs! […]

Snohomish County Loves WindsorONE

John, branch manager for Chinook Lumber Arlington, WA is proud to have some WindsorONE in his racks. Chinook Lumber Arlington has only been open for a few months now but things have been quite busy for the crew here. If you live in the Snohomish County area stop by Chinook Lumber’s new location for all […]

Contractors Welcome at Chinook Lumber

Tonight starting at 5pm, Chinook Lumber in Snohomish, WA will be hosting their 5th annual Contractor Appreciation Event. Cascade Capital & WindsorONE have teamed up together at a booth, so be sure to stop by and say hi. Chinook Lumber is proud to stock WindsorONE in their racks at all 3 locations. Stop in at any […]

Golf Anyone?

Al Kasper works for Von Tobel Lumber in Michigan City IN.  If he’s not driving WindsorONE deliveries around to the local builders, he’s driving golf balls on the course.  Al recently took a stick of the WindsorONE S4SSE trim board and created a golf club rack as seen in the picture below.   Al keeps his […]

Coronado Island builder

As a Back Of The Board subscriber, you may be  wondering if Windsor only manufacturers 1×6 WOTG based on the recent BOTB posts published.  But this blog isn’t as much about WindsorONE as as it is about highlighting the carpenters and craftsman who make Windsor products look amazing in their homes.  Bill Lyons of Lyons […]

Mike Porter is a carpenter in high demand in Dallas and a true craftsman.  Chad Dorsey of More Design + Build has been keeping him busy installing over 20,000 linear feet of 1X6 WOTG in their current Custom Home remodel. The homeowner wanted to replicate the feel of their beach house in British Columbia while […]

Don from Brooker Associates sports his new baseball cap…

The team of Brooker Associates has hung their share of WindsorONE+ Protected S1S2E.  Brooker Associates provides a wide variety of services from design and installation to complete remodeling.  Their geographic range consists of Orange County, parts of Los Angeles County and the Inland Empire.  Recently while installing our product, several of the carpenters noticed the […]

A cool creation by Cornerstone Construction…

Travis Horn the owner of Cornerstone Construction felt his new WindsorONE baseball cap was missing one thing, his company logo.  As you can see in the photo below, he got creative and embroidered his logo on to the new hats he and his team wear.  Outstanding Travis and thanks for being a WindsorONE fan! A […]

Dennis is no Menace to Great Craftsmanship

Dennis Monicatti from Monicatti Building Contractors is no stranger to using WindsorONE. Dennis who is based out of the Pacific Northwest specializes in restoration, remodeling and repair, often finds himself looking to WindsorONE to get the job done. Photos featured are from an awesome project that Dennis is currently working on in Lake Forest Park, […]

Craftsmanship Pays in Hawaii

Hawaii may be known for its beautiful beaches, but what it really should be known for are the gorgeous houses that are being built by Gill Development. Gill Development really knows what it means to be a true craftsman with this plantation style home that was built in Kauai. Thank you Pat Gill and the […]

Nickel Gap Shiplap in High Demand

The construction team at Scott Paine Construction just finished up a big renovation in Saratoga, CA with the ever so popular “Nickel Gap” wall & ceiling skinning.  The crew loved installing the WindsorONE WORS Shiplap pattern throughout this big home and project manager Iwona Gorzynska said ” photos don’t do it justice-it looks AWESOME!!!”  Thanks […]

Thomas Finley, an interior finish carpenter in Orange County, knows all about millwork scale, proportion, and the pursuit to perfect your trade for client satisfaction and upholding historic architecture. This Craftsman bungalow in Laguna Beach is on the historic registry of homes, and required Thomas’s attention to detail to maintain its rich history. The room […]

A Craftsman Display by Haven & Associates…

Gary Haven the owner of the company called up to claim some baseball caps for his team.  He shared with me that his company installed our Craftsman Moldings in the Conejo Hardwoods Design Center located in Westlake Village CA.   Residential remodeling has been Haven & Associates’ specialty since 1987.   A big thanks goes out […]

Meet the Philbrook Engineering & Construction Team

This 4000 sq ft home in Yarmouth Port MA just received a new WindsorONE interior. Chris the company owner sent us over some shots of his team who caught the “Call Kurt for a Cap” stamp on the WindsorONE+ Protected S4S they installed. They purchased our product through our good partners at Hinckley Home Center. […]

Stock Building Supply displaying awesome W1 support

This past week, Stock Building Supply in LA hosted a WindsorONE day to create awareness for their new S4S+ Protected, Specialty and Classical Craftsman Collection program. All Stock employees (yard staff, sales and mgmt) were sporting their custom “Enjoy WindsorONE” t-shirts, enticing conversations with customers throughout the day  Huge thanks to the sales manager, Trini […]

Pot O' Gold

In case you’re looking for to see a full array of Windsor products in Southern California … pretty sure you can follow the rainbow! Thank you Ganahl Lumber for your continued support and commitment to excellence.       

W1 meets one of Santa Barbara's finest carpenters

Sean Caldwell, Caldwell Construction, invited sales reps from Windsor and Weyerhaeuser to check out the carpentry he’s able to achieve using Windsor’s Craftsman Collection moldings to case out all the doors and windows in his own home.  Sean uses his home as an example to prospective clients … sharing that the most common first compliment from […]

Another WindsorONE Jersey winner!

Paul Cyr of Cyr Lumber won the 2nd Patriots jersey at the NRLA LBM expo yesterday.  Here you’ll see Thursday’s finalists that went head to head to win their prize.  Thank you to everyone that stopped by to hang out with the Windsor Mill crew this year at the Expo!

Jackson Design knows craftsmanship 

If you find yourself in San Deigo, swing through Jackson Design & Remodeling‘s new showroom, Home Expressions.  The team at Jackson is transforming the design and construction process, providing homeowners full scale rooms to conceptualize a variety of different looks for the home.  Here, they’re using Windsor’s Classical Craftsman collection for door casing as you […]

NRLA LBM Expo 2016

Come join the Windsor crew at Booth 413 tomorrow for the 2nd day of the NRLA LBM expo in Providence, RI and get your shot to win a custom WindsorONE Patriots jersey.  Here you can see today’s finalists and the big winner, Dirk Koopman of Koopman Lumber!

Beautiful Soffits in Bath, OH

Check out this beautiful soffit and fascia work-in-progress by Sinopoli Builders!  Sinopoli sourced all their Windsor material from Jeff Underwood at Lodi Lumber, in Lodi, OH.  If you work in the greater Cleveland/Akron area, go visit Jeff and Jim Rice in Lodi for your WindsorONE needs!

"There's No Place like Home.."

Just like Dorothy from the Wizard Oz, the crew at NSPJ Architects believe there’s no place like home! Thanks to NSPJ Architects in Prairie Village, Kansas for hosting an AIA lunch & learn today.  Be sure to check out NSPJ Architects if you are in the Kansas City area! Welcome to the Website for NSPJ […]

WindsorONE Craftsman from Coast to Coast

Architects, builders and homeowners across the US are seeing the value of the WindsorONE Classic American Molding Collection.  Homeowner/builder Chris Muffels of Kensington MD was nice enough to send over a couple of shots of his Classical Craftsman collection and said “It really made my home pop.”  Give WindsorONE a call at 888-229-7900 and ask […]

Welcome Back WindsorONE!

Lindsey Grove, the WindsorONE Road Warrior, is canvasing the OR market to let all the dealers know that WindsorONE is back! If you’re a yard, builder or transplant who’s been a fan of WindsorONE, Capital Lumber in Portland OR can serve up all your WindsorONE Trim Board needs.  

Streamline Builders Finishes up for a White Christmas

The team at Streamline Builders just finished up another beautiful renovation just in time for a White Christmas.  That’s right, you’ll find “white” WindsorONE trim boards & moldings throughout this Mill Valley CA project supplied by Golden State Lumber in San Rafael. Wainscoting and walls decked out in WORS Shiplap with Craftsman style details throughout. […]

Keith Parks is making fans!

As you can see here, Keith the owner of Designs & Structure has been spreading the good cheer about a product he enjoys working with, WindsorONE. The Pure Platinum Beauty Salon is getting a makeover of their own and WindsorONE will become part of the renovation. A big thanks goes out to Keith, the team […]

X Marks the Spot

Interior barn doors are all the rage for new renovations & remodels, just check out these and the great finish work by the team at Woodwork Solutions out of Mission Viejo, CA.  WindsorONE trim boards & moldings were used throughout their latest project. Woodwork Solutions offers high end finish carpentry specializing in custom cabinetry, kitchen […]

Staying warm is easy

As Fall changes to Winter this month, it’s important to keep our domes warm … and Texas is no exception. The general manager from Weyerhaeuser-Carrolton TX sent us this picture of his inside sales team proudly sporting their W1 beanies in the office. A huge thank you going to the Weyerhaeuser sales team for their […]

WindsorONE "Vandal" ized this Home with Superior Trim

Moscow, Idaho is home to the University of Idaho Vandals and is now home to this beautiful custom home. Doug (pictured on the right) from Moscow Building Supply teamed up with Rich (pictured on the left) from Aspen Enterprises to trim out the exterior of Rich’s home. WindsorONE was used as the choice exterior product for […]

"Put a Lid On It!!"

That’s just what the team of Barsch Woodworks of Denver, CO did on this big 10,000 sq ft custom home with WindsorONE+ Protected Specialty Boards. Builders are taking advantage of primed ceiling lids both interior & exterior with little to zero downfall that look great and are easy to install. Austin Hardwoods supplied all the […]

Healthy Living, Healthy Trim Boards

The Three Sisters Garden Project is an agricultural program that integrates sustainable farmland stewardship with food-based community engagement and education. The building in the picture below will be the market place for locals to get freshly grown vegetables. You can see the new white exterior trim that was installed by Herb Clough of Clough Contracting. […]

Wainscot your Bathrooms? Oh yeah

Nothing like really dressing up your bathrooms with some cool wainscoting love.  AJ Kirkegaard Contractors gets credit for these beautiful bathroom upgrades using all WindsorONE +Protected Specialty Boards & Wainscoting Caps from the Classic American Molding Collection.  All the material was provided by Austin Hardwoods in the Mile High City of Denver, CO.

The Billy Lord Band gets signed!

It’s official, Colin Boughton the drummer just called to inform me the band got signed and they are moving to Tennessee.  Here’s Colin sharing a shot of the set with him wearing his favorite hat, our WindsorONE Baseball cap.  You can keep up with the Billy Lord Band on their Facebook page. A big thanks […]

From Fisherman to Finish Man!

Michael Rogers is the finish carpenter for Fenner Homes in South West MI. He is a lucky guy as his schedule is as follows: On Mondays this is what he does…… From Tuesday to Friday, you’ll find him putting his craftsmanship to work with WindsorONE Trim Boards they secure from Big C Lumber. A recent […]

This Bell Tower's for you!

Imagine walking into your foyer and looking up only to find this masterpiece built by Pete Colucci, owner of The Wooden Edge. That’s what you get with Pete, an “edge” given his years of finish carpentry work. Pete used the WindsorONE WOTG specialty board product he bought down at our partner Morse Sash & Door. […]

West Coast Road Warrior covering the East!

Normally you’ll find Scott Green on the Western half of the US but not this week. Scott just left our friends at Yankee Pine Lumber in Rowley MA.  There you can find the WindsorONE+ Protected 4/4 & 5/4 trim board line.  They also have access to the Classic American Molding Collection. If you stumble across […]

“Niv & Die” by the V-groove of WOTG6….

Niv Shokrian owner of NIV Construction shared some pictures of his recent porch lid treatments. Niv went with the WindsorONE+ Protected WOTG6 product along with our S4S flat stock for the job. Our good friends down in Orange County, Ganahl Lumber, serve up his WindsorONE needs. Tim Negretre in sales for the Costa Mesa branch […]

WindsorONE can now be found in Oregon Duck Country!

Eugene, Oregon is home to the University of Oregon Ducks and is now home to a WindsorONE stocking lumber yard, Jerry’s Home Improvement Center! At Jerry’s you will find WindsorONE S4S traditional and WindsorONE+ Protected S1S2E. Huge thanks to Capital Lumber Portland for the partnership in delivering WindsorONE to this fine establishment. Check out Jerry’s Home […]

Riverside home sporting a new WOTG patio lid

John Biber of JL Biber Construction was kind enough to send some pics of a patio cover he recently completed in Riverside CA.  When asked what John appreciates most about using WindsorONE on his projects, his response was “by far the quality, the straightness for ease of installation and a superior final appearance.” John has […]

New lids for TL Finley

Husband and wife team of Thomas and Diana Finley of TL Finley took a well deserved break from installing a ton of WindsorONE trim and specialty boards for a quick photo.  Check out this detailed ceiling lid they tackled on their Laguna Beach renovation, all the material was supplied by Ganahl Lumber.  Oh yeah, and […]

Alliance Green Builders sharing their love for W1 boards

Bob Gilholm and the crew from Alliance Green Builders were stoked to share the many uses they’ve found for 1×6 S4S WindsorONE+ Protected trim boards. Porch lids?  Absolutely.    Box beams and ceiling treatments?  Sure.    Baseboards?  Why not … that works too. Cabinent installer?  Yeah – he played with some too. A huge thanks […]

Eryn’s new WindsorONE bookcase…

Eryn the home owner called up for some shirts and caps for her builders. She had a new built-in bookcase installed in her living room. WindsorONE S4S flat stock was the selected material for the job and Viking Lumber in Holden ME provided the product. Eryn sent over this note and a few pictures. “We […]

Mike Tower of Riverhead Rocking the Kilt!

If you’re at the North Kingston RI Riverhead yard and need some WindsorONE+ Protected Trim Boards, Specialty Boards or the Classic American Molding Collection, you can pull it right from the racks as they are a full line stocking dealer. Thank you Mike and Riverhead Building Supply for the years of support, and spot on […]

Custom Craftsman in Dana Point CA

Joe Hample from Richard Doan Construction is trying WindsorONE for the first time on this awesome Craftsman overlooking the water in Dana Point. A big thank you to Andree Primrose of Ganahl Lumber, Capistrano Beach for introducing Joe Hampel to WindsorONE, and an honorable mention to Andreas Villasenor and crew from Unique Siding for their […]

What’s hot out in NJ?

Well, the weather is heating up which means the need for WindsorONE is hot. John Kasper of Huston Lumber has the ability to bring to your job site any of the WindsorONE products you or your customers may desire. You might want to get fired up for John’s latest entrepreneurial endeavor, White House Station Sauces! […]

Katz Roadshow makes its way to Utah!

The Katz Roadshow makes its way to Salt Lake City to host a Frame to Finish show for Stock Building Supply’s customers. Mike Sloggatt will be here all day presenting at the Rio Tinto Stadium, come stop by if you are in the SLC area!

Katz Roadshow continues on to Pullman Building Supply!

Mike Sloggatt strikes again this week, but he is now out in coug country – Pullman, WA! If you are in the Palouse area, be sure to stop by Pullman Building Supply today to hear Mike give tips and tricks on proper installation of building materials. Pullman Building Supply address: 400 SE Fairmount Pullman, WA 99163 GO […]

Katz Roadshow is in the PNW!

The Katz Roadshow is at Woodcrafters in Portland, Oregon all day today! If you are in the area, come stop by and see Mike Sloggatt present Frame to Finish. Lots of great information and education will be presented today and we’d love to see you! Woodcrafters 212 NE 6th Ave, Portland, OR 97232 Don’t live […]

Kula Construction out of HI calls Kurt!

Juha, Xavier & Rich of Kula Construction are working on the St. Johns Church in Kailua, HI. WindsorONE is not foreign to them, they’ve been getting their trim package needs from Pac Source. While on site, both Juha and Rich sent over to us some pictures of their project with comments you can read below. […]

Craftsman Exterior & Interior

This home by RW Anderson Homes in collaboration with First Lamp Architecture Construction is a perfect example of the Craftsman style. They used WindsorONE for the exterior trim boards to create architectural elements of a true 1920’s – 30’s era Craftsman home. The attention to detail and character continues into the interior as well. Read […]

WindsorONE and a shot of Jim Beam please!

The team at Howell & Howell Contracting in KY are renovating this 1911 historical home that served as a boarding house for the distillery workers at Jim Beam.  This big renovation is where you’ll find WindsorONE +Protected trim boards for exterior trim including boxed columns & beams, porch soffits and misc trim applications supplied by […]

LP Adams makes the Wall of Fame!

Possibly the oldest continuing retail business in the town of Dalton, MA, L.P. Adams Co., Inc. is a family owned and operated business with members of the seventh generation working there today. You’ll find the WindsorONE+ Protected Trim Boards in their racks and if any of the other WindsorONE products are needed, they can serve […]

WindsorONE & Weyerhaeuser Staying Classy in San Diego!

WindsorONE and Weyerhaeuser are representing today at the Dixieline Golf Tournament! Lindsey (Product Specialist for the PNW) and Jeff (Weyerhaeuser Outside Sales) pictured above. Dixieline Lumber & Home Centers is now stocking W1 S1S2E and speciality boards! Check out their website at www.dixieline.com!

The WindsorONE Playhouse!

Todd, a weekend warrior down in So Cal, recently built his daughter a playhouse in their backyard. The intent was for Todd to have a testing ground for a few products that he is considering for his own castle. Seers Lumber provided him with the WindsorONE S1S+ Protected product that was used for exterior trim […]

Siding Solutions hanging WOTG+

WindsorONE caught Eric Cashion of Siding Solutions hanging some 1×6 WOTG+ Protected served up through Dixieline – Miramar. End cuts are being primed to maintain the 30-year warranty on this porch lid … and the ocean view from the back of this Del Mar home is amazing.

Graves Lumber in OH is having a Katz Roadshow!

If you hurry, you could make lunch and the second half of the Katz Roadshow which is presenting the Frame to Finish clinic right now at Graves Lumber!  Swing by the booth and say hello to WindsorONE’s Maggie Rogers, Product Specialist for the Mid West. Presented by Mike Sloggatt & Tom Brewer.  Check out this […]

The PNW has a new W1 dealer: Chinook Lumber!

Chinook Lumber, located in Snohomish, WA is now a proud dealer of W1 S4S. Stop in & speak with the store manager Rob (pictured above) and he will be able to answer any of your WindsorONE questions. Check them out by visiting their location 17606 State Route 9 SE Snohomish, WA 98296 or visit their website http://www.chinooklumber.com/

A Stunning Example of a Colonial Revival Home

It’s always a treat to see a newly completed project from Brent Hull. Brent is a nationally recognized authority on historic design, architecturally correct moldings & millwork… and the designer of the WindsorONE Classic American Molding Collection. Check out the full story of the addition and interior work done on this 1940s Colonial Revival home.

Katz Roadshow in Gardena CA

If you’re looking for some continuing education to boost your job site productivity, and simple steps to put more money in your pockets through efficiencies – then you should stop by the new Gardena location of Anderson Moulding.   Gary Katz will be educating from 8:00 – 4:00 today (Sat, 4/18).   Stop by the WindsorONE […]

Pacific Shore Builders - So Cal

The WindsorONE Trim Program is not unfamiliar to owner Sean Ragenovich who recently shared these great shots of his S1S2E exterior trim details.  Sean had these words to share,”Thanks again Kurt for the EXCELLENT product!! “ Frankly I can’t take the credit, that goes to the American’s working in our mill up in Willits CA. […]

WindsorONE Raceway by Gerret Marchello of Mass Appeal Construction

Gerret and his partner run and operate Mass Appeal Construction out of Long Island NY. They’re Riverhead Building Supply Customers and have used their fair share of WindsorONE+ Protected on both interior and exterior projects. Let’s also add that our partner Riverhead stocks the entire line of WindsorONE products from trim boards to specialty boards […]

Bringing Back Old School from 1904

Over a century and change since it was built, the Old Louisville Inn in Louisville, CO is getting a makeover that will bring it into the 21st century — but with its spirit intact. At least, so hopes J Fred Burns, one of the Inn’s new owners. “We decided we wanted to take the original […]

Boyce Lumber: Montana's Premier Lumber Yard!

Stop by Boyce Lumber in the great city of Missoula, Montana for all your WindsorONE needs. The Boyce Lumber sales staff (pictured above) will be more than happy to answer any questions you may have. Great guys and a great lumber yard to service you! Check them out at http://www.boycelumber.com/ or stop by at 1410 S Russell […]

Kurt & Scott want to see you at JLC!

The JLC Exhibit Hall opens this Friday 3/20! Kurt and Scott are rarely allowed out of the office, so this is a must see event! Come ready to learn about new construction techniques & building practices. We’ll see you at booth #1203 all day Friday & Saturday morning. (The conference opens today with educational sessions). […]

Got Trim?

Not a bad view of the Ole Mississippi River from inside this massive custom home that sits right on the bluff by Vipond Construction of Chaska MN.  You’ll find WindsorONE “protected” S4S as the trim of choice for the exterior application and throughout the interior as well.  Lampert Lumber supplying all the WindsorONE for this […]

G2 Gatorades go down as easy WOBC6 goes up!

On these warm 86° Coronado days, the fellers from Brady Hayek Custom Homes were especially grateful for the cold Gatorades. One of the beauties behind Windsor’s 1×6 WOBC6+ Protected is the versatility for Exterior and Interior use … as seen on this new custom home. A huge thanks going to Dennis Blackburn of Dixieline Lumber […]

San Diego showing off true Craftsmanship 

This Point Loma home was recently remodeled using a variety of WindsorONE S4SSE boards and some cove molding. The exterior trim work and columns look amazing … and we couldn’t thank the men at Vanberg Construction enough for their support. Special shout out going to Shelly & Mario at Dixieline Lumber, La Mesa for introducing […]

GOING UP??

Another big custom home from Adam Foresteire of Foresteire Customs in Spencer, MA is where you will find WindsorONE throughout his fine finish work.  Follow the WindsorONE  risers & skirt boards all the way up this custom staircase.  Thanks for the photo Adam, material provided by Koopman Lumber. http://www.koopmanlumber.com/

See you in Vegas!

Are you attending the LMC Annual Meeting in Vegas this week? The WindsorONE crew wants to see you there! Come visit us at booth #539; You’re invited to sit down for a game of Texas Hold’em to see if you can sweeten your deal…

Cathedral Style Ceiling Tongue & Groove

The crews of JL Madison General Contractors and Donahue Construction had nothing but praise for their use of Windsor products on this remodel/addition in Hidden Hills CA. Every room in the home has cathedral ceilings lined with 1×8 Hawaiian T&G and the smooth side of 2×6 S1S2E. Box beams are 1×12 S4S, and the exterior […]

Looking for a new look on Long Island?

Are you looking for a new wall skinning look to set your home or office apart from others on Long Island?  Head on down to your local Riverhead Building Supply and take a look at the 6″ tongue and groove “Plantation” pattern from WindsorOne.  This reversible product can give you a smooth clean look on […]

WindsorONE Fan Robert Dye & KW Builders....

A shout out for KW Builders as seen below in this team shot in their new “Fan” gear.  They recently completed an exterior trim job with WindsorONE+ Protected from The Moulding Company.  Robert was the one who reached out to us and played the role of Santa Claus and provided the photo.   Since then Robert […]

No ceiling like a WOTG ceiling!

A huge thanks to the men of OC Hauswerks for all the Windsor product used on this whole house remodel in Irvine CA. 1×6 WOTG skins the whole interior ceiling, while our S4S boards and the backside of the S1S2E boards trim out the new windows and doors. Next time you need a remodel done […]

WindsorONE aka "Legion of Boom"

Our Pacific North West Rep Lindsey Grove is pumped as you can imagine given her Seattle Seahawk’s repeat appearance to the Super Bowl.  Recently Lindsey sent down to the corporate office a new banner that she thinks reflects her inside support.  Thanks Lindsey for the banner, compliment and best of luck to your Seahawks. f […]

The “Colonel” of WindsorONE visits Queens NY….

That “Colonel” being Corbin Rinehart, the WindsorONE product specialist for the NY market and this early morning shot from his hotel room is quite amazing. However, it was not as amazing as Captain “Sully” Sullenberger’s “landing of a commercial jet on the river you see in this shot. They coined the vent, Miracle on the […]

Van Millwork serving up WindsorONE in Mass

The finish team at Ashland Cabinets sent over a couple of photos of some cool interior applications using WindsorONE.  This double stacked mantel and coffered ceiling is just some of the skilled craftsmanship they offer up.  All the WindsorONE material is supplied by Van Millwork in Bellingham, MA. Home http://www.ashlandcabinet.com/

FREE LUNCH @ JB Wholesale, Torrance CA

JB Wholesale Roofing and Building Supply (www.jbwholesale.com), one of Windsor’s newest SoCal dealers, is rocking some great BBQ for lunch today, while giving their customers a product education fair from 11:00 – 2:00. Stop by the WindsorONE booth to meet our sales teams most awkwardly tallest member and learn about using 30-yr warranted trim and […]

Blue Sky Boutique in Medford, NJ is Open!!

The doors are open at Blue Sky Boutique on #2 Main St Medford, NJ just in time for Christmas.  The custom sign was built out of WindsorONE “protected” trim boards that came from nearby Peter Lumber.  Thanks for the call Janine, the store, the sign and the shirts look great. http://blueskyonmain.com/

Spice Up Your Entry with WindsorONE

The team at Landric Associates out of St Paul, MN turned this standard entry way into a cool covered porch with the help of WindsorONE specialty boards and flat stock.  After a finish coat of paint, this entry will look amazing.  Great work guys.  All material was provided by Shaw Stewart Lumber. http://www.shawstewartlumberco.com/

The Boiler Makers of Purdue make the Wall of Fame!

At the Theatrical Department of Purdue University, they continuously are building sets for their performances and Alex Owens of the Theatrical Department finds WindsorONE not only to be a great product for these applications but also values the “Green” aspects of WindsorONE. Here are a few shots of the Purdue Team and their work…….. And […]

BelQuin Construction  - Lawrence MA

BelQuin Construction isn’t letting a few leaves get in their way of finishing the trim work on this farm house.  Follow more of their projects on Facebook BelQuin Construction / Lawrence MA  (978) 609-6950 & (603) 475-1242

WORS alive in San Diego

Huge thanks going out to the crew of Rimmer Construction (www.rimmerconstruction.com) in Cardiff, CA for covering this kitchen / dining lid with WORS. Minimal gapping in this application (1/16″), which is easily attainable with the butt joint shiplap. It’ll look awesome when complete … and the guys are already loving their shirts! Recognition going out […]

Custom Kitchens by Martin and Co. Rockin' the WindsorOne in Rochester

The team at Martin & Co. do some of the finest work in the upstate NY region specializing in custom kitchen and bath remodels. These before and after photos of a project designed by Jennifer Richards show some great work using WindsorOne boards and Classic American Moldings. All of the material was purchased through Rochester […]

Does Your Entry Stand Out?

Check out this renovation where WindsorONE T&G was used for the entire entry lid as well as the WindsorONE “plus” protected for all the trim and fascia.  Cobolt Designs of Long Island NY gets the credit for making this entry “Stand Out”.  Great work and all the material was supplied by Riverhead Building Supply http://www.rbscorp.com/

"Don’t Stop Believing"

The WindsorONE crew at Corporate in Cotati CA are strong supporters of the SF Giants! (Right to Left: Jojo, Kurt, Adina, Steph, Kim & Doris) Photo taken by Scott Green Dodger Fan whose half billion dollar roster will be watching, note not much going on at Dodger Stadium, aka “Chavez Latrine.” Go Giants!

West Central Construction and WindsorONE team up yet again in Missouri

The team at West Central Construction servicing central Missouri are kicking out some beautiful custom homes where you’ll find WindsorONE trim boards throughout the interior and exterior.  Mark and Micah Walje has over 50+ years experience and specialize in a superior customer experience throughout the process.  Check out some of the other work West Central […]

WindsorONE becomes part of "The Fania"

Mike Harnish of The Fania Roofing Company got a hold of the Kurtis and became part of the CK Nation.  Not only that but the company has become part of our “Wall of Fame” by sending out to us in Cotati Corporate a shirt of their own!  The Fania team buys their WindsorONE+ Protected from […]

Wainscoting for Sketchup Users

Looking to incorporate some wainscoting into your Sketchup project? There are a variety of WindsorONE wainscoting files for you to use in your models.. (including inside & outside corners for each style). The WindsorONE Classic American Molding Collection, Trim Boards & Specialty Tongue & Groove Boards are referenced as components in each file. You can […]

What We Build Defines Us

Are you looking to build a beautifully designed & well-crafted home? Then Building a Timeless House in an Instant Age, a new book by Brent Hull, is a must read. What do our homes say about us? What stories are they telling? Are they declarations of integrity, beauty, and heritage? Or do they suggest we […]

The 12th Man Loves WindsorONE

Beautiful sunny day in the PNW for Dunn Lumber’s annual golf tournament! What a great day for some golf and to also root on the Seattle Seahawks! If you live in the Greater Seattle area be sure to stop by Dunn Lumber for all your WindsorONE needs. GO HAWKS! Check them out at www.dunnlumber.com

Dress Up Your Porch with WindsorONE

Great looking porch upgrade in the Pacific Northwest from the team at Concept Construction out of Seattle.  Wrapped columns, ceiling lids, stair skirt & risers all get the WindsorONE “protected” trim boards from Dunn Lumber.  Thanks to Concept Construction for sharing the photo. http://www.dunnlumber.com/ http://www.conceptconstructionllc.com  

Hats off to Anderson Contracting in MA

  Thanks to Anderson Contracting in Lawrence MA for sending over a snapshot after finishing a big interior renovation with WindsorONE flat stock and moldings.  Check out the Classical Craftsman crown around the ceiling edge for detail.  Anderson Contracting partnered up with Arlington Coal & Lumber for all their building materials. http://www.arlcoal.com/

JDL Construction Fulfilling Dreams in SoCal

It is this unique combination that has made http://www.jdlconstruction.info/ Coastal Orange County’s premier residential contractor since 1998.  Teaming with http://www.ganahllumber.com/ and http://www.windsorone.com/  and bringing dreams to a reality.  Thanks to the JDL team for sending over a few photos of your great work.

Keep on Rockin in the RI....

Michael Lewis of M Lewis Carpentry Company loves rocking the WindsorONE for all his custom interiors.  Below you can see Mike having some fun in his “King of Boards” shirt while playing some air guitar.  If you’re looking for some WindsorONE, head on down to Riverhead Building Supply in RI which has two locations and […]

Got Wood Sighting!

Jeff & Josh Kravitz of Code Construction were sighted down in Menlo Park working on both the interior and exterior of a home not just using WindsorONE but showing the support by sporting their “Got Wood” field gear.   If you’re in the area, drop on by Randall Enterprises, aka The Moulding Company for all your […]

The Katz Roadshow at Mans Lumber & Millwork 5/21

Wednesday May 21st, Mans Lumber & Millwork in Canton, MI, will be hosting The Katz Roadshow Finish Carpentry Clinic; a hands-on building clinic with Gary Katz, finish carpentry specialist and nationally recognized author. These clinics will highlight WindsorONE’s line of Classic American Moldings, Andersen windows and architectural trim, new and innovative tools from Festool, and […]

Ode to Steve "Gerber" Kelly.....

Road Warrior Steve “Gerber” Kelly recently left Windsor Mill to pursue a new career in the same industry. He served and protected for WindsorONE in the PA/NY/NJ/OH/KY markets.. His Tough Mudder jersey has been retired at the WindsorONE Corporate offices in CA, high in the rafters. You’ll be missed Gerber…….

WinddzzzzzzzzzzorONE Bed?

When Willy Hammond called up for his shirts, learned he was making his client a bed using both WindsorONE flat stock and beadboard for decorative elements. The results of his craftsmanship can be seen in this shot of his project. Outstanding Willy! Product was secured down at Austin Hardwoods where Rusty at the counter can […]

Popular Beaded Ceilings

Check out one of Jas Design Build’s latest renovations where WindsorONE WOTG was used for the beaded ceiling lid.  This clean look is grabbing attention and you can see why.  Give Dunn Lumber a call today http://www.dunnlumber.com/ and ask about WindsorONE beaded products.

Deck Wrap done right by Don Hutchins….

12 years ago Don needed some deck wrap trim to add an element of finish detail and went with some 1×12” WindsorONE.   12 years later it still looks beautiful and 12 years later Don is still working with WindsorONE. Along with this small sample of Don’s work, you can learn more about his services and […]

Paul's new potty....

Paul Meltzer is a retired craftsman. Recently he had a crew do some work on his home, he was quite impressed with the trim they bought, WindsorONE from Koopman Lumber.   Paul being an ex-carpenter said, “Wow, this stuff looks really nice.” He then called for shirts for he and the crew, per Paul, he wouldn’t […]

WindsorONE Mania by the Mayven Crew……

Check out these interior details by Ask the Mayven Inc out of Demarest NJ. , These loyal Kuiken Brothers – Emerson supporters recently showed off their finish details with some pictures sent over to us. All the details are made of WindsorONE products with the majority being our S4S flat stock manipulated into their customers […]

SPBC4 in all its glory

A visit was made today to an avid fan, Arlene Bennett of Charles Pankow Builders.  Arlene has used WindsorONE SPBC4 and S1S2E boards to create an epic farm house porch experience, surrounding 2 sides of her own home.   Porch lid, column bases, exterior fascia, and window surrounds are all doting Windsor products. A shout […]

Dunn Lumber: Improving Homes Since 1907

If you are in the Greater Seattle area be sure to stop into one of Dunn Lumber’s 11 locations for all your WindsorONE needs. The Dunn Lumber crew in Everett (picture shown above) will be happy to assist you with any of your building needs. Check out http://www.dunnlumber.com/locations to find the closest Dunn Lumber location to you!

New additions to team Horner Millwork

Susan Gurry, VP of marketing for Horner Millwork stopped by the WindsorONE booth at the JLC Live Show to share with us two new additions to her team, Melissa & Jessica on the right.  However, their visit was twofold, one to meet Kurt and two to get some shirts! Thanks for all the great support, […]

Plotz & Tanner Construction Company

A new home is being built in Los Alamitos CA by Plotz & Turner Construction Company. Chris Plotz called us up for some shirts and shared with us the construction of the home. Below you’ll see the crisp clean white WindsorONE+ Protected S1S2E trim that is being used for fascia. Chris also sent over a […]

Even the trim is bigger in TX!

Huge props going out to the finish carpentry from Sierra Trim in Dallas TX.  John Adams and Jeff Roesle deserve the WindsorONE swag they received for their coffered ceilings, door jambs, and baseboards on this Sebastian Construction Company project. Keep up the solid work, men … and wear those shirts proudly.  Wishing you guys continued […]

Builders Alliance Home Expo 2014

IF YOU ARE IN THE BELLINGHAM, WA AREA COME CHECK OUT LINDSEY GROVE FROM WINDSORONE AND DAVE SEELEY FROM CASCADE CAPITAL SHOWING WINDSORONE AT THE BUILDERS ALLIANCE HOME EXPO SHOW. WE WILL BE HERE UNTIL 4PM TODAY AS WELL AS TOMORROW. FIND OUT HOW BUYING AN AMERICAN MANUFACTURED PRODUCT HELPS YOUR LOCAL ECONOMY! FOR MORE […]

Scituate Lumber & WindsorONE

Say hello to Jessica Miniter from Scituate Lumber.  Jessica just received a WindsorONE Got Wood shirt and as you can see, is ready to educate her customers on the uses and advantages of a WindsorONE Protected board. If you’re in the RI area, stop in to see Jessica and the rest of the folks at […]

Get your chair rail right

In case you missed it, revisiting a comprehensive article on chair rail installation Brent Hull did for THISisCarpentry.com. It goes over how to set up proper classical proportion in a room and reviews some of the most common chair rail mistakes. See the full article at THISisCarpentry.com. Also check out Brent’s book, Building a Timeless […]

Kurt makes a house call

While traveling with Corbin Rinehart, Prouduct Specialist, our very own Kurt “The Kilt” made a house call to see some current work from Dumond Construction was working on today.  Jerry Dumond met us in this gorgeous upcoming neighborhood in Rockland, MA.  Jerry was using WindsorOne for some of the exterior trim boards and also informed […]

A Windsor Fan Meets Scott

While at a prospective customer talking about Windsor Trimboards and Moldings we ran into this gentlemen working for the yard who currently doesn’t carry Windsor(yet but soon). However, he’s a fan as you can see from the gear.   Douglas Lumber in Smithfield RI getting to see the Windsor Tribe out in the wild.  

Windsor Customer Assists in Molding Sample

Brady Rodkey from Kinsley Custom Homes gets an assist from Windsor Mill’s Corbin Rinehart,  Territory Sales Manager for the Northeast, building the Classical Colonial Crown sample for the upcoming JLC Live show in Providence RI. Be sure to swing by and meet the crew including the famed Kurt at our booth on March 21st and […]

The Shirt off John's back.....

John Hunt of H&L Builders in Clayton CA was kind enough to give me the shirt off his back! In exchange, he got himself and crew some new field gear from WindsorONE for his continued support through The Moulding Company. . Thanks John for donating a shirt for the Wall of Fame!

Molding that's safe enough for baby

Are you looking for a framing solution? The WindsorONE wainscot caps have a full 3/4″ gap which is great for capping wainscot but also for framing your art. Many canvases are stretched over 3/4″ frames, making it a perfect fit. (This canvas was a jpg printed on a canvas ordered through an online printer.) WindsorONE […]

Weather Permitting

The weather has been tough for so many of you on the East Coast this year, but hang in there blue skies are coming. In the West, Baytown Builders are moving forward with their addition in Newport Beach. Baytown Builders  – (310) 749-9814 Servicing Los Angeles & Orange County Call John Chavez to discuss your […]

Superbowl weekend at the Meadowlands!

Mike the owner of Maslyn Door Company called up today for his WindsorONE Fan Gear. During our discussion, he informed me that he is a neighbor to the stadium, this shot is from his home. Much like the consistency of Robo-QB Payton Manning, Mike truly enjoys the consistency of America’s trim, WindsorONE.

WindsorONE sponsors "Anytime Fitness" Arms

Anytime Fitness sponsors a Christmas Tree every year on the Town Green in Windsor, CA.  Local businesses sponsor Christmas trees and decorate them anyway they want.  Anytime Fitness wanted to use local resources and looked to WindsorONE to donate some material for their strong arms.  If you visit the Town Green in Windsor, check out […]

This Old House:  WindsorONE Classical Colonial Style Crown Molding

In this episode of  This Old House,  Bob Villa chats historic moldings with Brent Hull, historical millwork expert and designer of the WindsorONE Classic American Molding Collection.  Carpenter Bob Riley & crew (above) adapt the Classical Colonial Cornice buildup for this space in the step by step video. Brent & Bob discuss historical moldings Bob […]

Real vs. Fake Wainscoting

A side by side photo comparison of WindsorONE tongue & groove wainscoting vs. imitation 4×8 mdf panels, some items of note: WindsorONE Wainscoting – Depth with crisp straight lines & shadows – Comes in 16′ lengths – Real wood substrate, no odors or harmful offgassing – Tongue & groove construction; built to last

Katz & Crew Using WindsorONE T&G on the New Shop

Gary Katz is documenting the build of his new shop. In this video they’re installing WindsorONE T&G for the soffit. They include tips on checking moisture content, fastening, etc. Read the full post here.  And for more how-to on all your carpentry projects check out THISisCarpentry.com.

Legacy Home Builders

A big shout out and thank you goes out to Marcello Sousa of Legacy Home Builders in Milford, MA. Marcello is currently using WindsorONE protected trim boards on a job in Needham, MA for all of the exterior trim. They buy most of their Windsor products from Koopman Lumber. Thanks and keep up the great […]

6 Rules For Using Moldings In Your Home

Building with History: Molding from Brent Hull on Vimeo. Brent Hull, historical millwork expert, founder of Hull Historical and designer of the WindsorONE Molding Collection goes over the do’s and don’ts of using moldings in this episode of ‘Building With History.’ Abstract below, see the full post at The Timeless House blog. “Although nearly all […]

Petra Builders

A big shoutout and thank you goes to Mark Goodinson and his right hand man Norm of Petra Home Builders. They are currently working on a 23 lot subdivision in Seakonk, MA where you will find WindsorOne trim boards on the interior and exterior. Mark bought all the material for this job from Humphrey’s in […]

Coffered Ceilings on Long Island

Thanks to the crew at J Petrocelli Contracting for sharing some of their craftsmanship on this coffered ceiling in a conference room on Long Island, all while sporting the WindsorONE T’s.  Another happy customer of Riverhead Building Supplies. http://www.rbscorp.com/

idea gallery

Are you thinking about enhancing the ceilings on your next project? Adding wainscoting to complete a room? Need some mantel ideas? Check out the WindsorONE Idea Gallery – a growing collection of images from the WindsorONE archive, and jobsite photos that talented craftsman from around the country have sent in of their WindsorONE projects. (You […]

Don't Give Up!

The Ganahl Lumber marquee in Anaheim, CA is always inspiring. Next time you’re driving down Ball Rd, make your way by Ganahl and check it out. Ganahl Lumber 220 E. Ball Rd. Anaheim, CA 92805 (714) 772-5444 http://www.ganahllumber.com    

Building America at Foggs Lumber

Kai was picking up some WindsorONE at Foggs Lumber in VT when a guy in the yard showed him one of the Build America Stickers. Kai decided to stick it on the back of his truck to show his pride for American manufactured products!

Plumb House Builders - Milford, MA

A big thank you goes out to Plumb House Builders of Milford, MA who is currently working on a 428 unit apartment complex in Cambridge, MA.  WindsorONE trim boards are being used for all of the interior trim work.  Jeff Bergeron and Jim Gallagher are working hard to make these units look great with “miles […]

Old Gristmill Tavern - Seakonk, MA

Reinke Construction Company is currently in the process of rebuilding the Old Gristmill Tavern in Seakonk, MA after a fire destroyed much of the building in June. The full story on the fire can be found at the link below. Jim Reinke and his crew are using WindsorONE trimboards for the interior on this remodel […]

KBS Building Systems - East Bridgewater, MA

A big shout out and thank you goes to Todd Donovan, a sub contractor for KBS Building Systems in Massachusetts, who is current installing WindsorOne+ Protected trim boards on the interior of all of the modular homes in Meadowbrook Estates.  Todd does a great job and should be recognized for his hard work.  Keep up […]

Quality Builders Son- Pt Loma, CA

The hard working crew from Quality Builders Son snapped a few photos of this huge kitchen ceiling lid while on a coffee break.  Definitely a detailed project with all the electrical cans, skylights and vents to cut around while installing WindsorONE WOBC6 bead board, but these guys make it look easy.   Awesome looking work, […]

Vonnegut Thoreau Construction  - San Francisco

Before & after pictures of this 1875 San Francisco victorian give you a good understanding of why Vonnegut Thoreau Construction is an artisan-style builder, which means they approaches every project with a combination of skilled craftsmanship, careful management and attention to the client’s unique needs. Travis Kappes, part of the artisan-style building team at Vonnegut Thoreau Construction, […]

New WindsorONE Dealer near Buffalo, NY!

        Mosher Lumber in Clarence Center, NY has a reputation for carrying some of the highest quality products. With the support of our distribution partner BlueLinx, Mosher Lumber expanded upon their name- brand products with WindsorONE Traditional S4SSE and Specialty boards. Check out Mosher Lumber on the web at www.mosherlumber.com .

WindsorONE Wednesday

Scott Schneider runs a young crew and recently called in for shirts. He informed me that he mandatorily requires his team to sport their field gear on Wednesday’s, hence the photo caption. They pull their trim needs through Carolina Lumber, a longtime partner and supporter of WindsorONE. When the whistle blows, this team then heads […]

Beatty Lumber's New Rack Tags!

Beatty Lumber in Upper Darby, PA (near Philly) is supporting the Made in the USA message. To help them do so, their bins got some new tags that proudly display the Build America message, and provide easy identification of the WindsorONE Classical Molding profiles! Check out Beatty Lumber on the web @ http://www.beattylumbercompany.com/ or visit […]

Jefferson Lumber stocking in Louisville!

Looking for a pro- lumberyard in Louisville? Jefferson Lumber’s got you covered for all your WindsorONE+ Protected needs to provide you with the highest end interior and exterior trim board on the market. Check out this 2nd generation yard in person located at 4406 Poplar Level Rd, or call them at (502) 458-3241.

Does your home stand out?

Saunders Custom Builders of Long Beach, CA sure turned this home from boring to beautiful with their recent exterior renovation.  You’ll find WindsorONE on the fascia, rakes, soffits and trim around this home.  Another great project where http://ganahllumber.com/ supplied all the material

Greg Putman Construction - HI

Greg the owner recently emailed this over to us, per Greg, “ALOHA ,  here is a home I built in 2006 that used an enormous amount of your interior product exclusively”   Putman Construction Custom Home with broker contact info.  Thanks for sharing the pictures Greg!

2 New WindsorONE Road Warriors!

Up in the Pacific Northwest you’ll find Lindsey Grove and in the deep Northeast Corbin Rinehart.  Both just got through with an aggressive training program which entails working side by side with our American Manufacturing Group in Willits CA.    Please help us welcome our newest cast members as they travel through their new territories.